Project

Toyota 4AGE Turbo powered Escort

Custom-engineered bellhousing adapter integrating a turbocharged Toyota 4A-GE with a 5-speed TTI sequential transmission, including full drivetrain 3D modelling and installation support.

Toyota 4AGE Turbo powered Escort

Toyota 4A-GE to TTI Sequential Transmission Adapter

Jon approached InGear Performance looking to upgrade his turbocharged Toyota 4A-GE-powered race car from an older Toyota synchromesh gearbox to a 5-speed TTI sequential transmission.

The challenge was creating a precise bellhousing adapter that would correctly locate and align the new transmission with the existing engine, flywheel and clutch package.

Rather than designing the adapter from basic measurements alone, we 3D modelled the crankshaft interface, flywheel, clutch assembly and transmission input shaft. This allowed us to establish the critical dimensions and component relationships before designing the adapter around the complete drivetrain assembly.

With the drivetrain modelled, we designed a custom bellhousing adapter to provide accurate engine-to-transmission alignment, correct input shaft engagement and the required clutch positioning.

The project went beyond simply supplying the adapter. We also visited Jon’s workshop to assist with the installation, check the drivetrain setup and help select the appropriate clutch configuration for the new sequential transmission.

Project Scope

  • Turbocharged Toyota 4A-GE engine
  • Upgrade from Toyota synchromesh transmission
  • 5-speed TTI sequential gearbox installation
  • 3D modelling of crank, flywheel, clutch and transmission input shaft
  • Custom bellhousing adapter design
  • Clutch selection and drivetrain compatibility
  • On-site installation assistance

Engineering the Complete Installation

Projects like this demonstrate why we look at the complete drivetrain rather than an individual component in isolation.

By modelling the engine, clutch and transmission together, we can identify potential fitment issues before manufacture and design components around the actual application.

Every InGear project begins with a conversation — understanding your goals, your vehicle and your vision.

If you’re considering fitting a sequential or competition transmission to an application it was never originally designed for, talk to InGear Performance about the engineering required to make it work.